English
Spanish
French
German
Italian
Chinese (Simplified)
Japanese
Korean
Arabic
Portuguese
|
| Home | » Products | » Ups | » GEESYS 3-3 UPS System |
GEESYS 3-3 UPS System
We are proud manufacturer, supplier and exporter of high grade GEESYS 3-3 UPS System to our respected customers. Made from the supreme quality components with modern technology, this GEESYS 3-3 UPS System is used in diverse industries for different gadgets, equipment and devices.
The system comprises the 10 KVA to 200 KVA (3 phase input, 3 phase output) double conversion On-Line UPS with an isolation transformer at Output. The Load is supplied non-stop by the inverter with stabilized, clean and regulated sine wave output power.
Output and Input filters enhance the immunity of load from power disturbances as well as surges. GIGA Line is helpful for mission critical applications such as Hospitals, Industrial Automation, IT, Call Centres, etc. Thanks to ultra-modern microprocessor / DSP based outstanding latest technology design. GIGA Line is supplied with software that can be utilized to monitor varied parameters of the UPS and also can be helpful for remote monitoring / control on the web by adding SNMP Card.
Main Functional Features:
- Fully Programmable Rectifier, Inverter, Batteries, Static Switch & Dynamic Behavior.
- Jumper Selectable O / P Frequency 50 Hz, 60 Hz or 400 Hz
- Isolation Transformer for Better Performance
- Latest Microprocessor / DSP Technology
- 24 MIPS Highest Speed for Better Control
- Advanced Battery Management
- Isolated Output
- Upto 7 Units in Parallel
- Sixth Generation Low exhaust IGBT
- GUIDED. PC Testing for Easy Installation
- Single Control Card for Higher MTBF
- 100 % Unbalanced Load Acceptable
- ECO Mode
- Static & Manual Bypass
- Isolation Transformer
- ECO-MODE
- User Friendly Touching Screen Display
- Communication Solutions
Specifications:
Rectifier |
|
|
Input Connections |
3 phase, 4 wire, earth |
|
Input Voltage |
Nominal 400V AC + 20% |
|
Input Frequency |
Auto adjust, 45 - 65 Hz |
|
Power Factor |
0.8 |
|
Soft start |
Yes, with zero inrush current |
|
High/ Low DC option |
Available |
|
Programmable |
Rectifier gain, Rectifier current gain, Output voltage, Input current limit, Charge current |
|
Output ripple |
< 1% |
Inverter |
|
|
Inverter |
Nominal 400V DC; Programmable between 300 to 600 V |
|
Inversion method |
PWM, IGBT based, High frequency, Full H-bridge per phase |
|
Unbalanced load |
100% |
|
Isolation |
Via output transformer |
|
Efficiency |
96% on full load conditions |
|
Output destortion |
Linear load : < 2%; Non-linear load : <5% |
|
Requlation |
Programmable per phase |
|
Absolute accuracy |
32 points per sinewave |
|
Sine processing |
3 : 1 |
|
Crest factor |
<3 volt after 10 ms. |
|
100% load step response |
Temperature dependant up to 150% |
|
Temperature supervision |
Bypass, Flat topping output reduction |
|
Frequency stability |
4 points, with programmable warning & shutdown |
|
Frequency tracking |
< 0.01% |
|
Output frequency |
Programmable, + 10 Hz |
|
Max. output current |
Programmable RMS and peak current |
|
IGBT supervision |
Yes |
|
Hardware supervision |
Yes |
|
Field up-gradable to parrallel |
Yes |
Parallel Redundancy: |
|
|
Number of UPSs |
Up to 8 |
|
Power rating |
Any capacity, can be mixed |
|
Master appointment |
Automatic, any UPSs |
|
Maximum current |
Programmable |
|
Front panel indications |
Master, Slave, Share fault, Group fault |
|
Shared current |
Computed indicated |
|
Phase difference between UPSs |
< 50 micro secs. |
|
Parallel frequency range |
50 Hz |
Application:
- RV, boat, and off-the-grid home battery storage systems
- AC Home Lighting System
- DC Home Lighting System
